Hot Rolled High Strength Lassen Steel Sheet Pile
Steel sheet pile is a kind of section steel with lock. Its section has straight plate shape, groove shape and Z shape, etc., and there are various sizes and interlocking forms. The common ones are Larson type, Lackawanna type and so on. Its advantages are: high strength, easy to drive into hard soil layer; it can be constructed in deep water, and if necessary, it can be added with oblique support to form a cage. Good waterproof performance; cofferdams of various shapes can be formed according to needs, and can be reused many times, so it has a wide range of uses.
+86 15650078182
+86 15650078182
+86 15650078182
sales07@zhongximetal.com
Contact Us

Product Description

Product nameSteel Sheet Pile
TechnologyCold rolling/hot rolling
FormZ /L /S/straight
StandardGB/JIS/DIN/ASTM/AISI/EN, etc.
MaterialQ234B, Q345B, JIS A5523, SYW295, JISA5528/SY295, SYW390, SY390, S275, S355, S390, S430, etc
ApplicationCofferdam/River Flood Diversion and Control /Water treatment system fence/flood control/fence /Protective embankments/coastal berms/tunnel cutouts and tunnel bunkers /Breakwater/barrier wall/hard slope/retaining wall
Length6m,9m,12m,15m or up to 24m according to customer requirements
Diameter406.4mm-2032.0mm or customized according to customer requirements
Thickness6-25mm or customized according to customer requirements
SampleProvided free of charge
Delivery time 7 to 25 working days after receipt of deposit
PackingStandard export packing or according to customer's requirement


Product Display


Steel Sheet Pile


Steel sheet piles are long structural sections with a vertical interlocking system that create a continuous wall. The walls are often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it is driven into. The pile transfers pressure from the high side of the wall to the soil in front of the wall.


In piling, hot rolled steel sheet pile and cold-formed steel sheet pile are two primary methods of manufacturing sheet piles. While there are differences between these two methods, the most important distinction is the interlock. Since hot-rolled steel sheet piling is produced from steel at high temperatures, the interlock tends to be tighter than its cold-formed steel sheet pile counterpart. Normally, looser interlocks are not recommended in extremely hard driving conditions or for walls requiring low permeability. Otherwise, the two types of sections perform similarly.


谷歌详情模板2-11.jpg


Hot rolled sheet piles

Hot Rolled Sheet Piles are formed by profiling the steel with high temperatures as the rolling process occurs. Typically, hot rolled sheet piles are produced to BS EN 10248 Part 1 & 2. Greater thicknesses are achievable than cold rolled sheet piles. The interlocking clutch tends to be tighter as well.

 

Cold rolled / formed sheet piles

Cold Rolling and Forming processes are when the steel sheet pile is profiled at room temperature. The profile thickness is constant along the width of the profile. Typically, cold rolled/formed sheet piles are produced to BS EN 10249 Part 1 & 2. Cold Rolling occurs in a continuous section from hot rolled coil whereas Cold Forming occurs is discrete lengths either from decoiled hot rolled coil or plate. A wide range of widths and depths are achievable.


Applications


  1. Retaining Walls
  2. Flood Defense
  3. Ship Berthing Structures
  4. Foundations in Various Structures
  5. Basements & Car Parks

Sheet piles are a commonly used material in construction. They are sections of metal sheets that feature edges that are interlocked. The applications of sheet piles vary. They can be used for retaining walls, underground structures, and even at seaports. Thanks to its interlocked edges, sheet piles can be installed into the ground to provide the foundation for various structures.


Product Inventory

We are a professional steel dealer. With the support of the most professional steel manufacturers and a large number of customers, we can not only provide you with ordinary steel but also help you find very personalized steels, such as special steel grades, Special sizes, special craft shapes.

谷歌详情模板2-2.jpg

Packaging and Shipping

We adopt standard export shipping packaging and bundles steel strips according to the size of the steel sheet piles. According to our delivery experience, a 20-foot container can hold 22 tons of carbon steel, and a 40-foot container can hold 25 tons of carbon steel. For larger orders, we use bulk vessels to transport you, and the price is cheaper. Also, we can customize the packaging according to the needs of customers.

 

Container size

20ft STANDARD: 5895mm(Length)x2350mm(Width)x2392mm(High) 
40ft STANDARD: 12029mm(Length)x2350mm(Width)x2392mm(High)
40ft HIGH-CUBE:12024mm(Length)x2350mm(Width)x2697mm(High


谷歌详情模板2-3.jpg


Online Consultation

Submit

Related Products

---------------------------------------------------------------- 分割线 AMP 放到之前: